Millennium One Step™ Foamable Adhesive is a highly elastomeric, one-step, all-purpose, foamable adhesive that contains no solvents, sets in minutes, and is designed for use with our patented application process (U.S. Patent Nos. 7,056,556; D501,855). 

The One Step™ application process utilizes the patented Multi-Bead or Multi-Bead Applicator Plus which is quick and easy to use resulting in significant labor savings for the contractor.

Millennium One Step™ Foamable Adhesive is designed for use as an adhesive for bonding approved roof insulations to a building’s structural roof deck, base sheets, other insulation boards, and smooth or properly prepared graveled built-up roof surfaces.

Approved Insulations and Substrates

Surface Preparation

All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven.

For applications over existing weathered asphalt or coal tar pitch BUR, apply Millennium Universal Primer prior to the application of adhesive.  For applications over fresh and/or non-oxidized asphalt, coal tar or plastic film membranes, apply Millennium Surface Treatment prior to the application of adhesive. 

Application 

Refer to Product Information Sheet for complete recommendations and/or requirements. 

• With a utility knife, remove the molded tips at the groove from the One Step™ mixing head.
• Attach a One Step™ mixing nozzle to the threaded mixing head.Place the cartridge into the appropriate One Step™ applicator.
• Apply Millennium One Step™ Foamable Adhesive directly to the substrate, using a ribbon pattern. Space 1/4" to 1/2" (0.6cm to 1.3cm) wide beads, 12" (30cm) o.c., to achieve proper coverage rates for insulation attachment. As adhesive is applied, immediately place insulation board into wet adhesive. Do not allow the adhesive to skin over. Eliminate uneven surfaces to ensure positive contact between the insulation board and substrate.
• Un-used material can be applied at a later date by simply plugging the cartridges (with provided half moon plugs) and using a new One Step™ mixing nozzle.

Use one of our fast and dependable One Step™ applicators to apply the adhesive which include the Multi-Bead Applicator Plus, Multi-Bead

1.5 Liter            OS-FA15-04                  4

Keep temperature of contents between 65°F-85°F (18°C-29°C) 24 hours prior to use. Do not store in direct sunlight or temperatures higher than 90°F (32°C).