Roofing | Insulation Attachment Adhesives | Foaming Insulation Adhesives | Millennium One Step™ Green Foamable Adhesive
|
| Millennium One Step™ Green Foamable Adhesive |
|
|
|
Millennium One Step™ Foamable Adhesive is a highly elastomeric, one-step, all-purpose, foamable adhesive that contains no solvents, sets in minutes, and is designed for use with our patented application process.
Our One Step™ application process eliminates error due to poor mixing. Application is quick and easy, resulting in significant labor savings for the contractor. No expensive specialty pumps or spray rigs are required. |
|
|
Approved Insulations and Substrates -
HD wood fiber -
Isocyanurate -
Perlite- minimum 3/4" (1.9 cm) -
Polystyrene -
Gypsum cover board -
Asphaltic cover boards -
DensDeck -
Concrete -
Gypsum -
Cementitious wood fiber -
Lightweight insulating concrete -
Wood or steel -
Modified bitumen membranes and base sheets (sanded or granule surfaced) -
Approved insulations (multi-layer applications) -
Smooth or gravel surface built-up roof (re-roof applications) For a complete list of approved substrates and insulation types, or for additional information, contact our Technical Department. Surface Preparation All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven. For applications over existing weathered asphalt or coal tar pitch BUR, apply Millennium Universal Primer prior to the application of Millennium One StepT M Foamable Adhesive. For applications over fresh and/or non-oxidized asphalt, coal tar or plastic film membranes, apply Millennium Surface Treatment prior to the application of Millennium One StepTM Foamable Adhesive | Ready to use | Requires no mixing, reduces labor costs | | No temperature restrictions | Suitable for all climates | | One Step™ technology | Easy to apply | | Solvent free | VOC free, no odors | | Elastomeric | Remains flexible, absorbs stresses | | Low rise foam | Accommodates minor surface irregularities | | Replaces fasteners | Minimizes penetrations and deck corrosion | |
Millennium One Step™ Foamable Adhesive is designed for use as an adhesive for bonding approved roof insulations to a building’s structural roof deck, base sheets, other insulation boards, and smooth or properly prepared graveled built-up roof surfaces. Millennium One Step™ Foamable Adhesive eliminates the need for mechanical fasteners that can often cause damage to the roof deck, which can reduce the roof’s service life. With a utility knife, remove the molded tips at the groove from the One Step™ mixing head. Attach a One Step™ mixing nozzle to the threaded mixing head.Place the cartridge into the appropriate One Step™ applicator. Apply Millennium One Step™ Foamable Adhesive directly to the substrate, using a ribbon pattern. Space 1/4" to 1/2" (0.6cm to 1.3cm) wide beads, 12" (30cm) o.c., to achieve proper coverage rates for insulation attachment. As adhesive is applied, immediately place insulation board into wet adhesive. Do not allow the adhesive to skin over. Eliminate uneven surfaces to ensure positive contact between the insulation board and substrate. Un-used material can be applied at a later date by simply plugging the cartridges (with provided half moon plugs) and using a new One Step™ mixing nozzle. Equipment The fast and dependable One Step™ applicators make applying Millennium One Step™ Foamable Adhesive simple: -
Patented Multi-Bead Plus* -
Patented Multi-Bead* -
Battery Powered Single Bead -
Pneumatic Single Bead -
Stand Up Single Bead -
Ultra Drive Manual Applicator -
Heavy Duty Manual Applicator
Color Off White-Light Amber
Limitations -
Do not apply to wet or damp surfaces. -
Not recommended for use with insulation boards larger than 4’ x 4’ (1.2m x 1.2m). -
Do not use warped or curled insulation boards. All insulation boards must lay flat upon the roof surface. - When applying Millennium One Step™ Foamable Adhesive over a smooth or sanded APP roof surface Millennium Surface Treatment will be required.
|
Packaging and CoverageMillennium One Step™ Foamable Adhesive is available in the following package: Cartridge Size Part# Cartridges/Case 1.5 Liter OS-FA15-04 4 Covers 600 sq ft (56m2) per case. Coverage estimates indicate total square feet of insulationattachment per case. Rates are based on an application pattern of 4ribbons, 1/4" to 1/2" (0.6cm to 1.3cm) wide, 12"(30cm) o.c. per 4’ x 4’(1.2m x 1.2m) insulation board. |
StorageKeep temperature of contents between 65°F-85°F (18°C-29°C) 24 hours prior to use. Do not store in direct sunlight or temperatures higher than 90°F (32°C). |
SafetyPrior to working with this or any product consult product label and Material Safety Data Sheet (MSDS) for necessary health and safety precautions. *U.S. Patent Nos. 7,056,556; D501,855 CAUTION:
All statements and technical information in this document are based on tests or data that ADCO believes is reliable. However, ADCO does not warrant or guarantee the accuracy or completeness of this information. The user has sole knowledge and control offactors that can affect the performance of ADCO’s products in the user’s intended application. It is the user’s responsibility toconduct tests to determine the compatibility of ADCO’s product with the design, structure, and materials of the user’s end product and the suitability of ADCO’s product for the user’s method of application and intended use. The user assumes all risk and liability arising out of such use. |
|
|
|
|
 |
 |
