Roofing | Insulation Attachment Adhesives | Foaming Insulation Adhesives | Millennium Pourable Foam Insulation Adhesive
|
| Millennium Pourable Foam Insulation Adhesive |
|
|
|
Millennium Pourable Foam Insulation Adhesive is a single component, elastomeric, low rise urethane foam adhesive that contains no solvents and does not require special tools or applicators. This liquid applied adhesive will, within minutes after application, begin to set transforming into a strong low rise foam. |
Approved Insulations and Substrates -
HD wood fiber -
Fiberglass -
Isocyanurate -
Perlite- minimum 3/4" (1.9 cm) -
Polystyrene -
Gypsum cover board -
Structural roof decking: concrete, gypsum, cemetitious wood fiber (tectum), wood or steel -
Base sheets (sanded or granule surfaced) -
Approved insulations (multi-layers applications) -
Smooth built-up roof surfaces (re-roof applications) For a complete list of approved substrates and insulation types, or for additional information, contact our Technical Department. | One part system | Easy to apply, no mixing | | No temperature restrictions | Suitable for all climates | | Solvent free | VOC free, low odor | | Elastomeric | Remains flexible, absorbs stressed | | Low rise foam | Accommodates minor surface irregularities | | Replaces fasteners | Minimizes penetrations and deck corrosion | |
Millennium Pourable Foam Insulation Adhesive is designed for use as an adhesive for bonding approved roof insulations to a building’s structural roof deck, base sheets, other insulation boards, and smooth built-up roof surfaces (non-graveled). Millennium Pourable Foam Insulation Adhesive eliminates the need for mechanical fasteners that can often cause damage to the roof deck, which can reduce the roof’s service life. Remove lid from pail and pour adhesive into an approved multi-port adhesive applicator. Millennium Pourable Foam Insulation Adhesive can also be applied directly from the pail. Apply Millennium Pourable Foam Insulation Adhesive directly to substrate, using a ribbon pattern. Space 1/2" - 3/4" (1.2cm - 1.9cm) wide beads, 12" (30cm) o.c., to achieve proper coverage rates. As adhesive is applied, immediately place insulation board into wet adhesive. Do not allow the adhesive to skin over. Eliminate uneven surfaces to ensure positive contact between the insulation board and substrate. In cold temperatures below 40°F (4°C), or anytime a quicker set is desired, spray a mist coat of Millennium Foam Accelerator to freshly applied adhesive.
Color Off white-light amber
Limitations -
Do not apply to wet or damp surfaces. -
Not recommended for use with insulation boards larger than 4’ x 4’ (1.2m x 1.2m). -
Do not use warped or curled insulation boards. All insulation boards must lay flat upon the roof surface. -
When applying Millennium Pourable Foam Insulation Adhesive over a smooth or sanded APP roof surface Millennium Surface Treatment will be required. |
Surface Preparation All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven. For applications over existing weathered asphalt or coal tar pitch BUR, apply Millennium Universal Primer prior to the application of Millennium Pourable Foam. For applications over fresh and/or non-oxidized asphalt, coal tar or plastic film membranes, apply Millennium Surface Treatment prior to the application of Millennium Pourable Foam. Equipment Approved application equipment: Packaging and Coverage Millennium Pourable Foam Insulation Adhesive is available in the following package: Pail Size Pails/Pallet Part# 3 gallon (11.3 L) 48 PF-IA3P-01 Covers 500 - 600 sq ft (46m2 - 56m2) per 3 gallon unit. Coverage rates my be slightly higher over irregular surfaces. |
Storage For ease of application, maintain a minimum material temperature of 70°F (21°C) prior to use. If a skin develops, simply remove it and use the remaining material. Shelf life is 6 months from date of manufacture. |
Prior to working with this or any product consult product label and Material Safety Data Sheet (MSDS) for necessary health and safety precautions. CAUTION:
All statements and technical information in this document are based on tests or data that ADCO believes is reliable. However, ADCO does not warrant or guarantee the accuracy or completeness of this information. The user has sole knowledge and control offactors that can affect the performance of ADCO’s products in the user’s intended application. It is the user’s responsibility toconduct tests to determine the compatibility of ADCO’s product with the design, structure, and materials of the user’s end product and the suitability of ADCO’s product for the user’s method of application and intended use. The user assumes all risk and liability arising out of such use. |
|
|
|
|
 |
 |
